Advanced Features

• Benchtop configuration 9” W x 11.25” H x 15” D
• Powerful 32-bit processor & 24 –bit A/D converter
• Language neutral color LCD 12 line 480 x 272 operator display
• XY Graphing (pressure, loss, or flow)-English, Chinese, Korean, Spanish
• Light ring indicators per test port identifies test port status Pass/Fail/In-test
• Modular pneumatic and control packages
• Expanded instrument control through EtherNet/IP™ Communication
• Single test channel, with multiple test port options(maximum of 4)
• Barcode ready input RS232 Alpha-numeric string stored with test result.

Standard Features

• Auto setup, verifies test pressure and selects the best test timers for optimum results in the allowed time cycle (US Patent #7,594,424 B2)
• Auto Calibration includes mass flow leak standard certified for pressure and flow
• Transducer zero and span are automatically reset during auto calibration
• Optional “External leak Standard” port 
• “Performance factor” calibration feedback ensures accurate results
• Manual edit of Calibration Program permitted
• Self Test isolates the test instrument pneumatics to verify a “no leak” condition
• Features ensure accurate results and easy operator setup and troubleshooting
• Firmware validation document included

Standard Test Pressure Ranges

Standard pressure transducer, valve manifolds, and regulator ranges:
-14.5, -2, 0.5, 2, 10, 30, 100, 200, 400, 500 or electronic regulation (PSIG)

• Optional low volume test manifold available
• Absolute pressure transducer with accuracy of +/-0.05% of full scale
• Six point pressure transducer calibration
• Data resolution 0.00001 psi/ and scc/m.
• Optional electronic regulator available with multi-point calibration
• Optional internal vacuum generator available
• Optional automatic supply shutoff available

Mass Flow Sensor Ranges

– CTS will optimize the flow sensor & flow range per application. Contact Application Engineering for available mass flow sensors.

Pressure Selections

PSIG, PSIV, inH2O, cmH2O, mmH2O, kg/cm2, ATM, inHg, cmHg, mmHg, kPa, Pa, MPa, Bar, mBar, Torr

Flow Selections

Sccm, sccs, scch, slpm, slps, slph, scfm, scfs, scfh

Time Selections

Sec, msec, min

Units of measure can be instrument global or per test program

Tooling Control

• Expanded control through EtherNet/IP™ Communication
• 6 inputs/6 outputs with up to five programmable tooling motions with feedback
• Optional “CTS Connect” pneumatic actuator port (5 pneumatic outputs maximum)
• Tooling I/O is  externally connected
• I/O 24 VDC – optional I/O cable “Cable,CTS, P56-540”

Test Data Storage

• Up to 5000 LIFO part results including Date / Time / Barcode / Test Results
• Selectable part serialization in the test data stream
• SPC data tracking for part traceability
• Expandable download through USB port
• External test data storage and wave form analysis through interface with the QualityWorX CTS DataHub
• Key lock or password protected program and data security

Electrical Requirements and Connectivity

• 88-264 VAC, 47-63 Hz or optional 22-26 VDC
• RS232(1)
• Telnet(1)
• Email Alerts
• Barcode ready (RS232)
• Mobile text
• USB mass storage device for backup, restore, and reports (FAT32, USB1.0,1.1,2.0)
• 1/8” NPT, Male Luer or Female Luer fitting for test line attachment