The INFICON UL3000 Fab is designed specially for helium leak testing in semiconductor applications. The instrument is attached the innovated ULTRATEST™ sensor technology. It provides flexibility, mobility, fast start up, high sensitivity, fast and precise test results, and reliability in helium testing.

Advantages

• Save Time with I·CAL software algorithm for fast measurements in the range of 10^-9 to 10^-12 mbar·l/s
• Minimize helium leak test efforts through quick evacuation and response time
• Time saved by easy maneuverability through slim design
• Low total cost of ownership (TCO) enabled by robust ion source (3 year warranty) and counterflow vacuum system
• Easy to use, operator-guided HMI with full color high resolution rotatable display

Typical Applcation

• Semiconductor Fabs
• Flat Panel Display manufacturing
• Solar Cell fabrication
• Glass and Web (roll to roll) coating
• General vacuum coating & applications

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết INFICON UL3000 Fab đã xuất hiện đầu tiên vào ngày Hystrong VN.

Accumulation Leak Detector

The Inficon LSD3000 AQ use forming gas or helium in a simple accumulation chamber for leak test. It  is the first leak detector to use forming gas or helium. As a result, the LSD 3000 AQ can help factories optimize the manufacturing cost with accumulation leak test.

Moreover, the instrument is extremely sensitive, detecting leakage as low as 10-5 mbarl/s. The LSD3000 AQ has the accuracy of Heli in leak testing but with the cost as low as using air leak test. The LDS3000 AQ is a product variation of the well-known LDS3000 system vacuum leak detector, with the same user interface and the most up-to-date fieldbus interfaces.

Features

• Detecting leaks down to 10^-5 mbar l/s for both gases
• Communicative diversity through a wide range of analog and digital interfaces
• Unique accumulation leak detector for forming gas and helium

Advantages

• Cost efficient solution
• Testing as reliable as vacuum chamber – at nearly the cost of air testing
• Ready for the future with fieldbus interfaces for the Industry 4.0 integration
• Temperature and humidty indipendency offers reliable test results with high repeteability

Typical Application

• Leak detection for room air conditioner components, refrigeration components or heating components
• Manufacturers of automotive gas lines, small heater coils, etc. that are now demanding greater leak tightness
• Leak detection involving warm, humid or large parts, where the pressure decay method is ineffective
• Other markets where helium vacuum leak detection has been considered too costly or complex

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết Inficon LSD3000 AQ – Accumulation Leak Detector đã xuất hiện đầu tiên vào ngày Hystrong VN.

Inficon Modul 1000 is a helium leak detector, designed as a modul. The instrument can be used for in both vacuum or sniffer mode for many different industrial leak testing application. The Inficon Modul 1000 can adapt to accommodate changes in production specifications.

The Inficon Modul 1000 helps factories optimize manufacturing line based on the reliable, intelligent and repeatable platform

FEATURES

• Wide range detection system: from 0.1 to < 5 x 10-12 mbar l/s
• Plug & play installation; flexible interfaces
• Software algorithm I.CAL provides accurate test results in all measurement ranges
• Storage of parameter settings for easy data transfer on an integrated, removable I.STICK
• Flexible control via optional display unit, remote control, PLC or PC

ADVANTAGES

• Reliable for maximum uptime: The INFICON Modul 1000 can maintain the stability and prevent the prepeatable measurement from effects in changing environment conditions.
• Intelligent Design improves measurement certainty: I.CALTM and I.Stick provide accurate measurements at unsurpassed speed in all measurement ranges. The instrument can offers flexible inputs and status outputs for PLC control
• Easy setting of automated procedures: Software functions implemented allow direct valve control of helium leak test systems without the use of an additional PLC.

Typical Applications

• Evaporators, condensers, compressors
• Valves
• Brake lines, fuel lines
• Hydraulic components
• Engines

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết Inificon MODUL 1000 đã xuất hiện đầu tiên vào ngày Hystrong VN.

HELIUM MODULAR LEAK DETECTOR – ULTRATEST TECHNOLOGY™

The Helium Modular Leak Detector INFICON LDS3000 is the updated version of the LDS2010. The instrument has set new standards for accuracy, reproducibility of measurement results and speed of leak testing.

The LDS3000 is designed with extremely small dimensions, 330 X 240 X 280 mm (13 X 9.45 X 11.1 inch). It makes the instrument become easier to be integrated into leak testing systems. Moreover, the space requirements and installation costs have been reduced even further, by eliminating the 19″ control module and significantly improving the cabling.

The Helium Modular Leak Detector LDS3000 is also available as LDS3000 AQ for the use in accumulation systems. The LDS3000 product family is the most appropriate solution for automated testing sytems.

Features

• Fast, optimized response times with I·CAL technology
• Compact design allows individualized, custom integration into leak detection systems
• The new, patented routine allows calibration of the LDS3000 leak detector within 20 seconds.
• Communicative diversity through a wide range of analog and digital interfaces
• Considerably improved cabling
• LDS2010 compatibility model

Advantages

• More Compact And Easier To Integrate
• Communicative Diversity
• High Reliability

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết Helium Modular Leak Detector INFICON LDS3000 đã xuất hiện đầu tiên vào ngày Hystrong VN.

TRACER GAS FILLER

The tracer gas filler INFICON Sensistor ILS500 F is equipped with complete tooling and gas filling functions. The product can be connected with both hydrogen and helium leak detectors from INFICON.

The tracer gas filler INFICON Sensistor ILS500 F can also perform a complete leak testing process. Every steps from gas injection and evacuation to tooling connection and disconnection, gross leak test, vacuum decay test, pressure decay test, blockage test and recipe handling can be done precisely.

The instrument has the other high pressure version. It removes every steps of time-consuming manual tracer gas filling and improves the quality of the leak testing results.

Features

• Complete tooling and gas filling function
• Color touch screen for easy setting the parameters
• Downloads and back-ups through USB-port
• Includes gross leak test prior to leak test
• Available also in high pressure version

Advantages

• Shorter cycle times
• Complete tooling and gas filling function for high-quality leak detection
• Eliminates steps of time-consuming manual tracer gas filling
• Significantly improves test quality assurance
• Less operator dependence – full control over all test steps

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết Tracer Gas Filler INFICON Sensistor® ILS500 F đã xuất hiện đầu tiên vào ngày Hystrong VN.

EX-CERTIFICATED HYDROGEN LEAK DETECTOR

The portable leak detector Extrima from INFICON is completely safe for users. The instrument helps operators identify exactly the leaking positions, even in the most difficult leak testing environment like Zone 0 (corresponding to Division 1).

The INFICON Extrima is designed with high sensitivity, Therefore, it can quickly detect leaks in many differet industrial applications, such as aircraft and hydrogen cooled generators. Particularly, the instrument can reduce the average time by more than 50% for identifying, locating and repairing a leak. With  Extrima, you will have a safe, precise and simple leak testing solutions for a complete fuel systems, both in production and maintenance situations.

The portable leak detector INFICON Extrima is certified for use in Zone 0, classification Ex ia, IIC T3 with ATEX, IECEx, TIIS, NEPSI and CSA certificates.

Features

• Intrinsically safe: Ex ia IIC T3
• High sensitivity 0.5 ppm/ 5E10^-7cc/s using 5% H₂/95% N₂
• Waterproof: IP67
• 1 minute start up time
• Unique selectivity to hydrogen

Advantages

• Totally safe for using in dagerous zones (Ex ia IIC T3)
• High sensitivity and fast recovery allow for efficient operation
• Low and easy maintenance
• Portable, battery operated (more than 7 hours of use per charge)
• Innovative Sensistor technology helps the instrument use forming gas (5% hydrogen in nitrogen) as tracer gas

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết Hydrogen Portable Leak Detector INFICON Extrima® đã xuất hiện đầu tiên vào ngày Hystrong VN.

The INFICON UL1000 Fab Helium Leak Detector is best choice in economic helium vacuum leak testing industrial or semiconductor environments.

The UL 1000 FAB is equipped with advanced dry pumping technology, which helps the device filter out residues, test part and process compounds or carbon hydrogen particles. In addition, the instrument is upgraded with a maximum detection rate of 10-12 mbar*l/s with short processing speed and response time. Continuous leak testing can be done in the background at least two decades lower thanks to the IZero feature.

The “Dry” Standard for Vacuum Leak Testing in Industrial Vacuum and Semiconductor Manufacturing

ADVANTAGES

• The smallest leaks can be detected through pump down and response time
• The IZero function saves users from having to repeat the test many times
• Make it simple to enter maintenance locations with little room by using a design that is nimble
• Low total cost of ownership (TCO) made possible by a reliable two hot filament ion source with a three-year guarantee and a counterflow vacuum system.
• Very simple to use with a rotating display, leak notification that is both visible and audible, and an optional remote control
• Minimal maintenance thanks to an automatic calibration method and a built-in test leak

TYPICAL APPLICATIONS

• Manufacturing industrial vacuum equipment with high requirements for cleanliness
• Vacuum components or sub-assemblies before they are installed on existing tools
• Maintenance work on vacuum instruments, with or without assistance from their own pumps
• Check and install gas treatment system
• Manufacture of semiconductors, flat panels or solar cell

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết INFICON UL1000 FAB đã xuất hiện đầu tiên vào ngày Hystrong VN.

The INFICON UL1000 Portable Helium Leak Detector is designed with state-of-the-art, high-sensing technology. It enables the machine to meet high standards for leakage. The UL1000 is ready to solve any problem in the leak testing or manufacturing industry. UL1000 provides high leak test speed, high accuracy result return rate and can set up repeated test loops to optimize leak test execution time. The UL1000 is designed for applications in a wide range of industries, testing vessels or large systems. The device can set up the test loop with high cycle 24/7, even the device can still run well in harsh environment.

Exceptional leak development speed, high sensitivity and accuracy enable the instrument to meet high standards in the field of leak testing.

ADVANTAGES

• Wide measurement range exceeding 15 decades
• Short pumpdown and response time
• Mobile all-metal housing for additional convenience with uncompromising maneuverability
• To ensure the quickest response time to leaks across all measurement ranges, I-CAL (Intelligent Calculation Algorithm for Leak rates)
• Zero function with automatic integration time alignment for fast and reliable leak test results
• Rotatable displays and user interfaces make controlling and interacting with the device simple and uncomplicated.
• Features that guard the UL1000 against particle and helium contamination
• Software upgrades through email are simply feasible.
• Auto purge cycle to assure cleanup and ready for leak test
• Long operating times and minimal maintenance costs are guaranteed by a tough mass spectrometer system with two filament ion sources (backed by a 3-year warranty).
• Internal calibration with built-in test leak to assure accurate test results
• Built-in software menu “Auto Leak Test” function to perform automated testing of hermetically sealed components (optional TC1000 Test Chamber)

TYPICAL APPLICATIONS

Leak testing and quality control of all types of components, including:

• Automobile parts
• Parts and assemblies for air conditioning and refrigeration
• Gadgets with hermetically closed electronics
• Exchangers of heat

—-

HystrongICL is a leading distributor of INFICON instruments in Vietnam, with an experienced technical team

Contact HystrongICL for more information! Contact now>>>

Facebook: HystrongICL

Hotline: (+84) 865.733.288 (call/zalo)

Bài viết INFICON UL1000 đã xuất hiện đầu tiên vào ngày Hystrong VN.

INFICON Whisper includes heterodyne capability, which reduces the ultrasonic frequencies detected to a range that the human ear can detect. As a result, variations can be identified to easily pinpoint the ultrasonic source. When headphones (included) are plugged into the detector, heterodyne output is enabled. An entrepreneurial touch pad is used to adjust sensitivity. When heterodyne mode is not enabled, multiple LEDs and an audible alarm detect the leak.

Whisper is ideal ultrasonic leak detector for detecting and locating ultrasonic frequencies generated when the following common situations occur:

• Leaks of any gas under pressure or vacuum
• Electrical arcing
• Worn bearings and machinery
• Malfunctions in steam traps
• Leaking seals

Use Whisper Transmitter to test seals around any enclosed space, including doors, windows, ducts and refrigerator cases. Simply turn on the Whisper Transmitter to generate an ultrasonic tone and place it in the area to be tested for leaks. Whisper can be used to trace around potential problem areas to alert you to the transmitter’s ultrasonic frequencies “leaking” through poorly-sealed areas.

Bài viết INFICON WHISPER – Ultrasonic leak detector đã xuất hiện đầu tiên vào ngày Hystrong VN.

INFICON GAS-Mate, the ideal tool for locating leaks in forming gas, flammable refrigerant, or combustible heating and appliance applications, raises the bar for combustible gas detectors. GAS-Mate is also extremely safe, so you can confidently leak test it.

The instruments outperforms competitors with twice the sensitivity – down to 5 ppm methane, the main component of natural gas. GAS-Mate detects a wide range of combustible gases, including ammonia, propane, ethanol, and hydrogen sulfide.

INFICON GAS-Mate or its field-replaceable sensor do not require calibration. Simply turn on the unit, wait a few seconds for it to warm up, and it is ready to quickly detect any gas leaks.

Bài viết INFICON GAS-MATE đã xuất hiện đầu tiên vào ngày Hystrong VN.